No array is defined что это значит

Сообщения: 48
Благодарности: 1

Конфигурация компьютера

Материнская плата: Asus M4A89GTD-PRO/USB3

HDD: Жёсткий диск : Western Digital WD3200AAJB-00WGA0 ATA Device (320Гб) / Жёсткий диск : Seagate ST310005 28AS SATA Disk Device (1000Гб)

Звук: Device Audio : ASUSTeK Computer SB600 High Definition Audio Controller

CD/DVD: DVD-Rom Drive : Toshiba-Samsung CDDVDW SH-222BB

ОС: Oперационная система : Windows 7 Home Premium Домашний выпуск Media Center 6.01.7601 Service Pack 1 (64-. )

Профиль | Отправить PM | Цитировать

добрый день, столкнулся с проблемой. поставил 2 hdd segate и hitachi на 80 гиг (ide) в биосе выставил raid/ после перезагрузке жму ctrl+f / утилита настройки рейда не видит жесткие. «no array is defined» что делать ? мать M4A89GTD pro-usb3.0
в мануале написано
6 xSATA 6.0 Gb/s ports 0,1,5,10 Support RAID UltraDMA 133/100 for up to 2 PATA devices
1 x JMicron® JMB361 PATA and SATA controller
если я правильно понял рейд а ide поддерживается на этой матери. так ?

может перемычки как то надо поставить правильно. стоят 1hdd-master , 2hdd-slave

Сообщения: 26925
Благодарности: 3918

поставил 2 hdd segate и hitachi на 80 гиг (ide) »

——-
ВНИМАНИЕ ознакомьтесь, прежде чем создать тему! Процессор — мозг компьютера, блок питания — сердце и печень.

Если же вы забыли свой пароль на форуме, то воспользуйтесь данной ссылкой для восстановления пароля.

Конфигурация компьютера
Материнская плата: Asus P9X79 Pro
HDD: 4х Hitachi HDS724040ALE640, Seagate ST3000DM001-9YN166, 4x WDC WD20EARS-00MVWB0, Intel SSDSC2BW120A4
Звук: интегрированная
CD/DVD: 2 x Lite-on iHAS-122
Ноутбук/нетбук: Gigabyte P34G (debian)
Индекс производительности Windows: 0. За отсутствием Windows

утилита настройки рейда не видит жесткие. «no array is defined» что делать »

——-
Господа! Убедительная просьба не обращаться за консультациями в ЛС. Поверьте, создать ветку в соответствующем разделе форума гораздо эффективнее.

Источник

No array is defined что это значит

Доброго времени суток. У меня появилась проблема и я хочу попросить Вас помочь мне.
Суть в том, что у меня биос не видет жесткий!! А при включении компьютера появляется вот это:

FastTrak 100 ™ «Lite» BIOS Version 2.00.1030.23
(c) 1995-2001 Promise Technology, Inc. All rights reserved

Scanning IDE drives.

потом всесто этой строки (Scanning IDE drives. ) появляется

No Array is defined.

Press to enter Fast Build ™ Utility or

Press to continue booting.

Подскажите что делать.
P.S. Пробовал, как вариант, установить Винду— диск видно(во время установки, в биосе всеравно не видно!!), дает его разбить, отформатировать и начать установку. Но после копирования фаилов установка прекращается и появляется «окно смерти»(Синий экран и много текста!)))

Источник

«No Array is Defined»?

Fresh install of WINXPSP2, new RAM 512, AMD Duron processor, WDC HDD 120gb, and pc is randomly rebooting approx 1 — 2 times per day.

First question: What does this mean and how do I correct it in BIOS?

scanning IDE drives.

NO ARRAY IS DEFINED
press to enter fastbuild utility or
Press to continue booting

When I attempt to enter the Fastbuild Utility, it doesn’t let me select anything.

Second question: I receive the following BSOD when it does NOT reboot on it’s own:

«PFN_LIST_CORRUPT» with stop error code of «0x0000004E»

Finally, I see the following issue in my device manager:

Other Devices: RAID controller «No drivers installed»

Aside from these issues/questions, there does not seem to be anything else going on. There isn’t anything installed on this pc yet, and I am ruling out the RAM due to the same issue as BEFORE I installed the new stick. (Unless the Geek Squad sold me a junk stick)
Thank you for your help!!

Do you have your Hard drives In A RAID array? And what type of Hard drive is it , SATA 150 or SATA2?

And youe PFN Error is a Ram error if you can run memtest here it is

Looks like Geeksqaud sold you a bad stick o ram..

Also may want to read below

Edited by slurpy, 26 December 2006 — 06:54 PM.

I can tell you that you do not have a raid array!
For Raid to work you need 2 hard drives that are the same size..
Can you get into your BIOS and select BIOS defualts.
When it runs and says no array is defined it is just doing a post self test. That is normal.
While in your BIOS (Basic Input Output system)
See if you can find a boot order..Once you find that tab make sure your Hard drive is listed first. And you can turn off the self post test i there as ell. It should be under advanced options.

To get into your BIOS it is usually esc or DEL or F10 to get to a boot order. What type of pc is it/ Dell, HP etc..

When I attempt to enter the Fastbuild Utility, it doesn’t let me select anything

This is because you dont have the hard drives to build a Raid array, more on Raid below

Edited by slurpy, 26 December 2006 — 08:02 PM.

I entered my Advanced BIOS menu, reset the boot sequence to C, CDROM, Zip, and disabled the Self Test. Afterwards it ran a memtest, then gave me the No Array Defined again, and continues to do so. No biggie, as long as it doesn’t interfere with any processes, I’m not going to worry.
The RAID controller issue in my DM states it’s located in PCI slot 6, what does that mean?

My processor is an AMD Athlon XP 1800+, 1.53 GHz/ 512 RAM (1 stick), AOpen AK77plus R1.16 motherboard. Now that I think about it, I replaced the graphics card and inserted a NVIDIA RIVA TNT2 Model 64 Graphics card. Any issues with compatibility there?

Memory test = good. hmmm

Any help appreciated.

You should be able to disable the RAID in the bios.

On ASUS motherboards, under the Advanced tab, Onboard RAID, Disable.

Источник

C — Arrays

Arrays a kind of data structure that can store a fixed-size sequential collection of elements of the same type. An array is used to store a collection of data, but it is often more useful to think of an array as a collection of variables of the same type.

Instead of declaring individual variables, such as number0, number1, . and number99, you declare one array variable such as numbers and use numbers[0], numbers[1], and . numbers[99] to represent individual variables. A specific element in an array is accessed by an index.

All arrays consist of contiguous memory locations. The lowest address corresponds to the first element and the highest address to the last element.

Declaring Arrays

To declare an array in C, a programmer specifies the type of the elements and the number of elements required by an array as follows −

This is called a single-dimensional array. The arraySize must be an integer constant greater than zero and type can be any valid C data type. For example, to declare a 10-element array called balance of type double, use this statement −

Here balance is a variable array which is sufficient to hold up to 10 double numbers.

Initializing Arrays

You can initialize an array in C either one by one or using a single statement as follows −

The number of values between braces < >cannot be larger than the number of elements that we declare for the array between square brackets [ ].

If you omit the size of the array, an array just big enough to hold the initialization is created. Therefore, if you write −

You will create exactly the same array as you did in the previous example. Following is an example to assign a single element of the array −

The above statement assigns the 5 th element in the array with a value of 50.0. All arrays have 0 as the index of their first element which is also called the base index and the last index of an array will be total size of the array minus 1. Shown below is the pictorial representation of the array we discussed above −

Accessing Array Elements

An element is accessed by indexing the array name. This is done by placing the index of the element within square brackets after the name of the array. For example −

The above statement will take the 10 th element from the array and assign the value to salary variable. The following example Shows how to use all the three above mentioned concepts viz. declaration, assignment, and accessing arrays −

When the above code is compiled and executed, it produces the following result −

Arrays in Detail

Arrays are important to C and should need a lot more attention. The following important concepts related to array should be clear to a C programmer −

Sr.No.

Concept & Description

Multi-dimensional arrays

C supports multidimensional arrays. The simplest form of the multidimensional array is the two-dimensional array.

You can pass to the function a pointer to an array by specifying the array’s name without an index.

C allows a function to return an array.

You can generate a pointer to the first element of an array by simply specifying the array name, without any index.

Источник

Читайте также: Леприконс что это значит